TyreSense IDX Firmware Change Log
Firmware Version: 3-0.054
Filename: APPL311_0p54_IDX.bin
Date: Sep 15, 2025
Changes from 3-0.053
- -Added configurable TyreSense sensor timeout (45 to 180s) with the default set to 90 sec.
- -Reduced no pressure change alarm to match TyreSense sensor timeout.
- -Increased TyreSense sensor timeout and no pressure change alarm by 30 sec when current pressure is less than 100 kPa.
- -Added configurable barometer elevation with the default set to 100m.
- -Default pressure trim is now enabled with a 4psi limit.
- -Default minimum TyreSense sensor dBm is now -65 dBm
Firmware Version: 3-0.053
Filename: APPL311_0p53.bin
Changes from 3-0.050
- -Added a user configurable system setting settle timer when reading the internal pressure after the value closes. Default settle time increased from 1500ms to 2000ms.
- -The internal pressure will no longer display with the TyreSense sensor pressure when the TyreSense sensor pressure data is valid and within range of the internal sensor.
- -Added support for new LCD unit with optional temperature sensor.
Firmware Version: 3-0.050
Filename: APPL311_0p50_IDX.bin
Changes from 3-0.049
- -Bug fix: Fixed issue with dBm value being displayed incorrectly in sensor tracker.
Firmware Version: 3-0.049
Filename: APPL311_0p49_IDX.bin
Changes from 3-0.043
- -Bug fixes associated with the IDX internal pressure sensor. TRS-IDX-AIR /A units only.
- -Added internal pressure sensor value to the main IDX display.
- -Removed ability to trim inflation/deflation while air is on
- -In wakeup mode, sensors are considered “awake” when pressure is greater than 10psi rather than at any time the sensor transmits.
- -Lower max wakeup time option from 10 minutes to 5 minutes
Firmware Version: 3-0.043
Filename: APPL311_0p43_IDX.bin
Changes from 3-0.042
- -Added support for internal pressure sensor calibration in the system settings.
- -Added a “tips” message to the LCD screen during boot to remind users to calibrate their IDX units.